Support Guide: Will the VANdoûr Screen Fit Your Campervan?
Our VANdoûr 4-in-1 Universal Screen is designed to fit most MWB (Medium Wheelbase), LWB (Long Wheelbase), and SWB (Short Wheelbase) campervans, making it a versatile solution for both side and rear doorways.
Here's everything you need to know to check compatibility:
How to Choose the Right VANdoûr Screen Size for Your Van
Measure Your Van’s Opening:
Width: Measure the width of the van opening at the top, middle, and bottom from the door seals/weather strips.
Height: Measure the height of the van opening from the top of the door seals/weather strips to the step or the location where the screen will end (to avoid gaps under the net).
Match Your Measurements to the Screen Size Ranges:
Large MWB/LWB Screen:
Opening Height: Minimum 1750mm.
Excess Fabric Range: 1750mm to 2050mm.
Important: Your van’s opening height must fall within this range to allow the fabric to be tucked and trimmed.
Opening Width: Minimum 1200mm.
Excess Fabric Range: 1200mm to 1700mm.
Important: Your van’s opening width must fall within this range to allow the fabric to be tucked and trimmed.
Small SWB Screen:
Opening Height: Minimum 1350mm.
Excess Fabric Range: 1350mm to 1600mm.
Important: Your van’s opening height must fall within this range to allow the fabric to be tucked and trimmed.
Opening Width: Minimum 980mm.
Excess Fabric Range: 980mm to 1700mm.
Important: Your van’s opening width must fall within this range to allow the fabric to be tucked and trimmed.
By following these steps, you can ensure the VANdoûr screen will fit your van perfectly, with no gaps or issues during installation.
See video link -
VANdoûr Universal Support Video
email for enquiries sales@thedour.co.uk
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article